Strange Problem

Martin Y

Well-Known Member
:confused:I cant get my GPS to update faster then 1hz. I did the 3.05s update. I get sat lock no problem but slow. I changed to 10 hz and saved, it then counts continusly (I unpluged at count 188). Switched back to 5 hz saved, powered off, back on and the same, Slow updating. What can you suggest Alex.

Martin
 

Alex Villa

Super Moderator
:confused:I cant get my GPS to update faster then 1hz. I did the 3.05s update. I get sat lock no problem but slow. I changed to 10 hz and saved, it then counts continusly (I unpluged at count 188). Switched back to 5 hz saved, powered off, back on and the same, Slow updating. What can you suggest Alex.

Martin
After the GPS is programmed to any baudrate, it doesnt progrm back untill you unplug the GPS from the OSD. So follow this instructions:
1- Set the desired baudrate on the menu, and save configuration.
2- Disconnect the GPS module
3- power off the OSD
4- Connect the GPS module back and power ON the OSD.

It will take like 30 seconds for the module to be programmed, and you might need a power cycle to get the GPS running back.
 
Top