1. M

    How to Repair Torn GPS Connector on RVOSD

    After having the GPS connector, traces/pads and a few components torn off, with help from Alex, I was able to repair my board. I created this image to help others with this similar issue and had Alex confirm it was correct. Tips: Use 30 AWG Insulated Wire to connect the small SMD parts Use a...
  2. R

    Trying to repair my crash dammage.. (L2, L7, L10)

    I recently crashed my aircraft, headlong into the concrete, and my RVOSD 5.1 took some damage. I'm trying to find the parts to fix it. Here are the two boards I will put up and additional post with the individual components I've recognized as damaged or missing. When I tested the unit after the...